Share this Story

Related Posts

  • Hereis1example

    Your video was a lot more helpful than the one on the website. I purchased my kit via LightmyiPhone. I am having one hell of a time trying to get this thing to work. I am not sure what I am doing wrong. I am certain it comes down to the placement of the red cable. Any advice you can lend? QUite frustrating. Thanks for your time and thank you for that video you made.

    • http://www.macmixing.com/ Dom

      Make sure you have a distinct Z shape on the red cable. Everything should work fine if you follow the instructions to the “t”. But you have to be dead on. It must be close to perfect. Let me know if you have any luck. The red cable just has to rest on the connection point.

  • saul

    i have a problem my mod kit light stays on and it nevers turns off what can i do?

    • Porto

      Just install it exactly as instructed, and turn off iPhone and power on again, use it until the battery basically runs out of battery, and recharge, and continue using as normal, it should soon after, start working fine, good luck, please let me know if it worked. good luck

  • Mark luna

    I need help I did it the extract way you did it for the iPhone 4 gsm, but my apple logo won’t turn off unless the phone is off. Please help

    • http://www.macmixing.com/ Dom

      I have a tutorial specific to the iPhone 4 GSM. Something wasn’t done correctly or you wouldn’t have that issue. Unless you have an app open that is constantly sending data. That could be it as well.

      • Mark luna

        what app do you think that could be ?

        • http://www.macmixing.com/ Dom

          Honestly not sure. could be anything you have installed.

          • Mark luna

            well I mean I closed all apps and I did it the exact way you did. By the way thanks for the tutorial it made things so much easier for me.

          • http://www.macmixing.com/ Dom

            Your Welcome!

    • Porto

      Hi:
      I noticed, that if you pair up your iphone to a Bluetooth device ( headset, speaker or other) and it becomes un-paired due to distance or other factors, your iphone will try to pair up, hence the light will stay on. Turn off your bluetooth, under settings, and it should work fine, if not try my other suggestion. Please let me know, if this worked for you. Thanks

  • http://solomotorsports.net Tony

    So i purchased 2 kits 1 for the 4 and the other for my 4s…The problem i have on my 4s is that when i take pics with flash it blurs them with the reflection…..What can i do?i also cant make it snug all the way and i get some light up top…..

    • Porto

      Hi:
      Yes I have seen and notice with others that when you take a flash picture, especially at night ( try in a dark room ) a picture at night, a glare, or ghostly image appears , or the image is blurry.
      I fixed this by putting a small strip of the black foamy sticker provided with the mod for use to hold and surround the LED, in the interior of the new back cover between the camera and the flash opening.
      Just tape a small strip between the lens and the flash opening, as to avoid the flash light to bleed into the camera lens, good luck.

      • http://www.macmixing.com/ Dom

        Great find. I personally haven’t had any issues with dark pictures using flash or any pictures for that matter, but that sounds like its a great solution.

        • Porto

          it happened with iphone 4S not sure with 4S

      • Tony

        I will do the same…Thanks

  • Porto

    sorry, iphone 4G not 4S

    • http://www.macmixing.com/ Dom

      hmm yeah i can’t say for sure about that model. sorry :-(

  • Mandolfini

    Wow! Awesome tutorial. Just watching it makes me want to get one and if I watch it while installing it I feel confident that I can do it. Just like you said in the video, PATIENCE!!! GREAT JOB!!!

    • http://www.macmixing.com/ Dom

      Thanks for watching!

  • R

    Wow great instuction video!!! Do you have a video guide such as these for an Iphone 4?

  • john

    Hi there,

    I installed the light mod kit to my iPhone 4 GSM. The problem I have noticed is that my wifi reception has lowered greatly, does anyone else have this issue too?

    Thanks

    John

    • http://www.macmixing.com/ Dom

      You may have connected something wrong, I would double check everything just in case. Let me m ow if you need more help.

    • jase

      My wifi had decreased significantly as well. i used the ko gadget light mod. followed the connection points. unless there is another connection point i’m going to uninstall. also, while charging the light stays on the whole time. listening to pandora…always on even if the screen went blank.

      • http://www.macmixing.com/ Dom

        yes this version stays on while charging. check out version 2

  • pedro ramos

    hi i ordered the old led mod..and now i notice that there is a new one thats 6 leds..so now i just ordered that one now do u have a video on how to install the new led mod?

    • http://www.macmixing.com/ Dom

      not yet but as soon as I get mine, I’m making one! :-)

  • nathan

    i have a 4s from sprint (cdma version) and i saw from a different website, not lightmyiphone, it says that there is a 4s gsm only version. should it work on mine also?

    http://www.ebay.com/itm/Apple-Luminescent-Logo-LED-Glowing-Mod-Kit-iPhone-4S-GSM-Black-Back-Cover-/180858077250?pt=PDA_Accessories&hash=item2a1bfb4042#ht_7439wt_952

    • http://www.macmixing.com/ Dom

      The 4S is the same CDMA or GSM :-)

      • nathan

        ok, cool, thanks! I just really didn’t want to buy the wrong thing then short circuit my phone or do something like that.
        THANKS!

  • pedro ramos

    so i ordered it on the april 26th the new and improved v2 led..when will i receive it?

    • http://www.macmixing.com/ Dom

      not sure man email the support for that website. Thanks for stopping by!

  • pedro ramos

    my led v2 just shipped..so i should be getting it on the the 15th and i notice there isnt a video yet? anytime soon?

    • http://www.macmixing.com/ Dom

      Friday my friend, Friday… or Saturday lol depending on when I upload it. But I’ll shoot for Friday!

  • pedro ramos

    okay thanks bud!

    • http://www.macmixing.com/ Dom

      no problem!

  • pedro ramos

    Hey dom! any good news?

    • http://www.macmixing.com/ Dom

      yeah I put the video up on saturday! It’s in our featured scroller, or do a search for lightmyiphone on here! :-)

  • cosmo

    Do you think I could connect the wires to something else so that it doesn’t light up when an app receives data? (i imagine it could be kind of annoying after some time)

    Would it be possible to connect it to the speaker or vibrate ? In this case it would only light up when it rings or it’s on speakerphone I guess.

    What else could I wire it to?

    Also, I found the kits much cheaper on eBay. Do you know if there is any difference in quality between the ones on the website and eBay ones?

    Thanks for the video btw!

    • http://www.macmixing.com/ Dom

      I can’t say whether or not you could connect it elsewhere because I’m not sure. I’m sure they engineered it as best they could.

      It doesn’t turn on a lot though. Also I can’t confirm the quality of eBay stuff. But lightmyiphone just came out with an improved version 2 kit you can find on our homepage or at the link below. It doesn’t randomly turn on. Only when the screen is active. Check out the video. http://mcmx.in/JsLw2B

  • Daniel

    I have install the led kit v1.. But lights doesn’t goes off when phone in slp mode.. N I’m not charging.. What’s wrong? Any kind souls enlighten mi?

  • Nick

    Just got the kit in. My iphone doesnt seem to look anything like what the instructions depict. I’ve got an iphone 4G with a 4G kit. Any thoughts?

  • Esme

    Hii i need help i get my kit for iphone 4s and i brock the cable red becouse i can not conet de “z” to de point please tell me how the “z” going exatly i cant understand i buy another light becouse i try and try an the red cable no stay ond the point mmm can you take a picture and send it to my mail to de exatly conection point , sorry for my english i’m learning jaja

  • Derrick

    How much is it

  • Victor

    Hi i just bought my led for iphone 4, it is gonna work on the 4s???

Join Our Mailing List

Email Format

Free iTunes Gift Cards!

Find us on Google Plus